Tarrant Machinery Logo

TRUCK, TRAILER AND MACHINERY SALES
SHIPPING CONTAINER SALES AND HIRE

11290 New England Highway, Tilbuster, Armidale NSW 2350

Tel: 02 6772 2145
Mobile: 0412 669 611
Fax: 02 6772 2142

 

Current Items for Sale

Photo
Brentwood Bogie Low Loader 1998 (s/n 679)
(Price: $35,900 inc. GST )


8.2 m long flush smooth steel deck, 1 set of 20ft container pins, center point suspension, 7.50R15 tyres, 2 cylinder air cooled diesel motor driving a hydraulic 40,000 pd Garwood winch, suspension slides forward and goose neck pivots to tilt trailer.

Photo
HINO FC BEAVERTAIL 1986 (s/n 749)
(Price: $9,900 Inc GST)


144hp 6 cyclinder diesel,5 speed,9300 GVM,400000 klms,12/8/2010 NSW rego,5.6m long x 2.43 wide steel floor tray with beavertail,2.6m long x1.0m wide ramps with electric over hyraulic operated,p/s.

Photo
Hino GH Cab Chassis 10/1994 (s/n 756)
(Price: $35,900 inc. GST)


223,000 kms, ex-govt., 220 hp turbo intercooled, 9 speed eaton, 4.8 m wheel base, 16,000 GVM, full air brakes, PTO pump fitted, 6.8 m of chassis rail behind cab, Nov NSW rego.

Photo
Hino GH Cab chassis, 8/1995. (s/n 743)
(Price: $33,900 inc. GST)


Ex-government. 350000kms. Turbo Intercooled. 220hp. 9 speed Eaton. 4800mm wheelbase. 16000 GVM. Full air brakes. 11 R 22.5 Tyres and rims. PTO and pump fitted. 6.8m chassis rail behind cab. P/S, NSW rego till 30/11/2010

Photo
Hino GH Furniture Pantech 2001 (s/n 732)
(Price: $50,000 inc. GST)


245 hp turbo intercooled,fully reconditioned 9 speed eaton, spring rear suspension, 312000 kms, alloy bull bar, nose cone, P/S, A/C, 16,500 GVM, 6250 mm wheel base, 7.95 m long x 2.41 m wide x 2.62 m high inside measurements pan with timber floor, ply sides with tie rails to suit furniture, 1.5 m wide x 2.4 m high side door on passenger side, dual alloy tanks,NSW roadworthy suppied.

Photo
International S3600 4X2 Prime Mover 1995 (S/N 644)
(Price: $39,900 inc. GST )


M11 350 hp Cummins, 10 speed road ranger, air bar rear suspension, 900,000 kms original, one owner furniture removalist, alloy bull bar, Sept 2010 NSW rego, ballrace turn table, new pearl paint, new leather driver’s seat, clean skin tyres.

Photo
Isuzu FRR525 4/2007 Tray (s/n 757)
(Price: $56,900 inc. GST)


181,300 kms, 220 hp turbo intercooled, 6 speed, air park brake, 10,400 GVM, 5150 mm wheel base, new 6.6 m long x 2.5 m wide steel floor tray with stainless steel rope rails and mud guards, LED side lights, electric windows, central locking, 1 lg tool box, P/S, A/C, NSW road worthy supplied, very good condition.

Photo
ISUZU NPR200 SHORT 4/2003 TRAY (s/n 754)
($24,900 Inc. GST)


140hp turbo,5 speed,165500klms,2.8m wheel base,4495 GVM (car licence),7990 GCM, 1/7/2010 NSW rego,p/s,electric windows,3.4m long x 2.3m wide steel floor tray with .3m high drop sides.

Photo
Krueger 7/1992 Tri-axle Drop Deck Curtainsider (s/n 735)
(Price: $29,900 inc. GST)


Has mez floors on bottom deck,35000 ATM,BPW axles with spider rims.12.9m overall length, steel checker plate floor,steel gates that swing out,10 winch straps on sliding track,dual tyre carrier,cleanskin 255/70/22.5 tyres,rear barn doors

Photo
Lewis Checkmate Bowrider 29/12/08 (s/n 617)
(Price: $39,900 inc. GST )


5.9 m long Boat on a boggie marlin galvanized trailer, 115 hp mercury out board, bimini cover, new boat with just demo hours, ski pole, trailer & boat with 11 months rego.

Photo
Mitsubishi FK617 5/1997 Curtainsider (s/n 693)
(Price: $29,900 inc. GST)


379,000 kms, 9,800 GVM, 5.2 wheelbase, 250 hp turbo intercooled, 6 speed, air park brakes, P/S, A/C, 6.67m long x 2.49m wide x 2.47m high curtainsider (inside measurements), rear barn doors, steel checker plate floor, new curtains, electric windows, central locking, NSW road worthy supplied.

Photo
Mitsubishi FM677 6X2 Cab Chassis (s/n 730)
(Price: $39,900 inc. GST )


1998, 418000 kms, air bag rear suspension, 6.2 m wheel base, 22,500 GVM, A/C, P/S, 250 hp turbo intercooled, 10 speed Mitsubishi box.

Photo
Nissan UD 10/1997 PK240 Tray, (s/n 727)
(Price: $42,900 inc. GST.)


346000 kms, 240 hp turbo intercooled, 6 speed, full S-cam air brakes, 7.4 m long x 2.46 m wide checker plate steel floor tray, 16,000 GVM, 26,000 GCM, P/S, NSW road worthy supplied.

Photo
Nissan UD MK240 6/2006 Tray, (s/n 753)
(Price: $56,900 inc GST)


48400klms original,240hp,6 speed,10400 GVM,4.85m wheelbase,6.2m long x2.5m wide steel floor tray,p/s,a/c,power windows,500kg tommy tailgate loader,NSW roadworthy supplied.

Photo
Nissan UD MK240 Cab Chassis 2005 (s/n 750)
(Price: $47,900 inc. GST)


240hp,6 speed,P/S,A/C,5150mm wheelbase,cleanskin tyres all round,1 owner,will take 22ft body.

Photo
NISSAN UD PK255 curtainsider 3/2001 (s/n 744)
(Price: $48,900 inc. GST)


255hp turbo intercooled,6 speed,full air s-cam brakes,275/70R22.5 tyres,P/S, A/C,363319 klms,6080mm wheelbase,7.52m long x 2.4m wide x 2.45m high(inside measurements), steel checker plate floor with steel gates and rear barn doors.

Photo
Static Enigineering Bogie Drop Deck Extendable Trailer (s / n 687)
(Price: $35,900 inc. GST)


825x15 running gear, 9.62m bottom deck closed and will extend a further 3.2m, steel floor, hydraulic ramps, white in colour.

Photo
Vawdrey 12/1998 45ft Drop Deck Curtainsider (s/n 669)
(Price: $33,900 inc. GST)


Has mezzanine floor on air bag suspension on spider wheels, gates, steel floor, 255/70 x 22.5 size running gear.

All truck prices quoted do not include Registration, Third Party Insurance, Stamp Duty, Delivery Charges etc., if applicable.

We are constantly trying to update this site.  Whilst care is exercised in the preparation of the ads, errors or omissions may occur.  Used trucks may be subject to prior sale.  If you experience any problems operating the site or cannot find the information you require, please let us know, so we can continue to provide the best possible service to you.
If you would like any more information about any of these vehicles, please contact Keith Tarrant at Tarrant Machinery on ph. 02-6772-2145 or mobile: 04-1266-9611

If we don’t have the vehicle in stock we can source it for you.

We also can customise truck bodies in our workshop to suit your business needs.

Also if you are looking to trade in a vehicle etc. feel free to speak to
Keith Tarrant at Tarrant Machinery
for a fair deal on ph. 02-6772-2145 or mobile: 04-1266-9611.


Copyright Tarrant Machinery 2008


Dealer Licence MD 17107

Web Development by Jane Flower